CME Tips (Changing a MOH file)

To change a MOH audio file,you must first remove the existing file with the no moh file-name command before specifying the new file, as shown in the example below.
If you configure a second file without removing the first,the MOH mechanism stops working and may require a router reboot to clear the problem.

(config-telephony)#no moh music-file-old.au
(config-telephony)#moh music-file-new.au

Also note that,when MOH from an audio file and MOH from a live feed are both configured on the Cisco CME router,the router seeks the live feed first.If a live feed is found,it displaces the audio file source.If the live feed is not found or fails at any time,it falls back to the audio file source.